Product list
Emergency rescue equipmentContact us
If you are interested in our products, please contact us.Jiangsu Mingjie Emergency Rescue Equipment Co., Ltd.
ADD：
North side of Jianggao Road, Zhonglian Village, Yexu Town, Gaogang District, Taizhou, Jiangsu Province
TEL：15152669837
FAX：
Email：
Life saving equipment
The fireproof cover made of imported fireproof fiber has the highest temperature resistance of 600 °C and has good heat radiation resistance, which is especially suitable for fire field use.
1. Life-saving slides can also be equipped with fire-fighting ladder trucks, fire-climbing vehicles, fire-fighting training towers, oil drilling platforms, airport command towers, and high-rise buildings.
2. The slideway is composed of an inlet metal frame, a metal connector, a slide body, and the like. The main body of the slide is made up of a combination of three layers of materials such as an outer protective layer, an intermediate damping layer and an inner layer of the sliding layer. After the slide is unfolded, the extension length of the protective layer should not exceed the extension length of the damping layer and the conductive layer. The connection between the main body of the slide and the metal frame of the inlet should be firm and reliable. A protective pad or other cushioning device can be provided at the exit end of the slide. The end of the chute exit can be equipped with a sandbag of appropriate weight to prevent flying, entanglement and curling at the outlet end of the chute during use, and should be provided at the end of the chute exit at 360. The nighttime identification and warning signs are visible in the direction.
3. The material of the main body of the slideway should be homogeneous and continuous in the longitudinal direction; the sewing lines of all parts of the slideway should be straight, tidy, flat, firm and elastic, and the stitching should be no less than 7 stitches per 30mm; the slide metal parts The outer surface should be smooth, free from rust, spots, and burrs.
4. Flame retardant performance: After the flame retardant performance test of the slide protective layer, the damage length is 15mm, the afterburning time is 0s, the smoldering time is 0s, and there is no melting or dripping.
5, breaking strength:
Protective layer Warp direction 1275N, weft direction 902N
Guide layer: 1380N, latitude 1083N
6, tearing strength:
Protective layer Meridian direction 147N, weft direction 108N
Guide slip layer 251N, latitude 175N
7. The joint strength of the sliding layer is 852N.
8, the extension rate ≤ 1.5%
9. Overall tensile strength: The entire slide (including the inlet metal frame, metal joints, slide body, etc.) should be able to withstand the overall tensile strength test specified in the standard. The test slide should not have cracks, fractures or permanent deformation. There should be no looseness, slippage and damage at each joint.
10, different load decline speed:
Under the standard minimum load of 343N, the sliding speed of the load in the slide is 2.60m/s;
Under the standard load standard of 687N, the sliding speed of the load in the slide is 2.77m/s;
Under the standard maximum load of 981N, the sliding speed of the load in the slide is 3.02m/s;
11, different load landing speed:
Under the standard minimum load 343N, the grounding speed of the load in the slide is 0m/s;
In the state of the standard load 687N specified by the standard, the landing speed of the load in the slide is 0 m/s;
Under the standard maximum load 981N, the grounding speed of the load in the slide is 0m/s;
12. Continuous decline test 100 times:
The reliability test is carried out under the maximum load condition of the slide. During the test, the slides should not be cracked, broken or permanently deformed, and there should be no looseness, slippage and damage at each joint.
13. The speed of different loads after 100 consecutive decline tests:
Under the standard minimum load of 343N, the sliding speed of the load in the slide is 2.63m/s;
Under the standard load standard of 687N, the sliding speed of the load in the slide is 2.79m/s;
Under the standard maximum load of 981N, the sliding speed of the load in the slide is 2.97m/s;
14. Different load landing speed after 100 consecutive decline tests:
Under the standard minimum load 343N, the grounding speed of the load in the slide is 0m/s;
In the state of the standard load 687N specified by the standard, the landing speed of the load in the slide is 0 m/s;
Under the standard maximum load 981N, the grounding speed of the load in the slide is 0m/s;
Comply with GB21976.4-2012 "Building Fire Escape Refuge Equipment Part 4: Escape Slides" Standard, CNCA-C18-04: 2014 "Compulsory Product Certification Implementation Rules Fire Equipment Products" Standard and CCCF-XFZB-04 Product Certification Implementation Rules Fire Equipment Product Escape and Self-rescue Respirator Products Standard, providing inspection reports and 3C certification.
相關推薦
